Beautiful Work Wiring Up A Switch To A Light

At the light the white wire connects to the neutral terminal and the black wire connects to the hot.

Wiring up a switch to a light. Wiring a single pole light switch. Wiring a light switch is not as difficult as you might think it is. The white or neutral wire bypasses the switch and goes straight to your lights.

Simply strip the wire to the length specified and push the wire into the hole. Use the black. How to install and use an ele.

The cable going to the light switch is connected as follows fig 2. In the tutorial viewers will see the use of. The neutral wire from the source is spliced to the white cable wire and continues on to the light.

If you are using a plastic switch the earth wires will need to be connected to the terminal. The video covers how to wire a basic 15 amp single pole light switch with 14 2 electrical wire. If you put the loop over the screw in the counterclockwise direction tightening the screw will force the loop open and could create a loose connection.

The switch serves to cut the power from reaching the light switch. The source hot wire is connected to a switch terminal and the other terminal is connected to the black cable wire. Basic electrical work can be done by following a few simple steps.

Run a black wire from the new switch to the power source. Method 2 of 2. In this picture you can see the strip gauge on the back of the switch.