Simple Replace Dimmer With Regular Switch

You can replace the dimmer switch with a regular light switch only from what you have described you need to install a 3 way light switch not a single pole light switch.

Replace dimmer with regular switch. Loosen the screw that holds the grounding wire to the switch and remove the dimmer switch from the switch box. The typical connections are as follows. Set the wall plate aside for re installation later unless you are replacing it.

Many thanks post tweet share. Disconnect the traveler and or common wires from the dimmer switch. Next using a pair of needle nose pliers wrap the bare ground wire around the green screw at the bottom of the new standard switch.

Replacing a dimmer switch with a regular switch. More about a wiring a switch. Unscrew the two screws that hold the dimmer switch in the gang box and carefully pull it out.

Can anyone inform me how difficult this is to do. Secure it by tightening the screw then attach the traveler and or common wires from the switch box to the screws at the sides of the new switch in the same manner. Test the dimmer switch that you d like to replace to be sure that it no longer has power.

Then use a screwdriver to remove the plastic wall plate. The black wire to the lone screw on the 3 way light switch. Richard from the information you have provided yes when replacing a standard dimmer switch with a single switch simply install the single switch and connect the wires to the switch terminals.

Be sure to get your connections tight and well insulated wire nuts work well for that. Remove the wires connected to the switch or dimmer if there are loops at the ends of the wires cut them off and. Try shutting off another circuit and don t start working until the light tells you the power is off.